Manual
User manual summary
Screen description
You can switch between four screens on your variometer using the left and right buttons
First screen
Waiting GPS location
 |
GPS location is fixed, waiting flight start. Number of bars proportional to the GPS signal quality.
 |
Flight recording (manual by pressing the left button or automatic depending on your settings).
 |
The other icons indicate the volume level, the battery status and if bluetooth is activated.
1/Altitude (sea level) and AGL (ground level) are displayed alternately. Be sure to have downloaded your AGL data for your area in the SDcard AGL folder.
2/The up/down indication arrow gives integrated information on associated X sec at the sink rate.
3/The time and the flight time are displayed alternately, the time is indicated with an “h” (12:36) and the flight time with “:” (05:21). When the flight duration is less than 1 hour the indication is “min: sec”. After 1 hour flight we have “hour: min”.
4/The glide ratio and the sink rate can be configured to have only one information of your choice or both alternately.
5/Without GPS location and/or when your speed is lower than 5 km/h, the displayed heading is the magnetic heading (like a compass). With GPS and when your speed is higher than 5km/h, the heading is the direction of your movement.
 |
Second screen
1/ Latitude and longitude of your location.
2/ Speed
3/ Without GPS location and/or when your speed is lower than 5 km/h, the displayed heading is the magnetic heading (like a compass). With GPS and when your speed is higher than 5km/h, the heading is the direction of your movement.
 |
Third screen
1/ Sound level
 |
Fourth screen
1/ Statistics
 |